Wavertec US Plug 1M 3.3Ft 2.5” IDE + 3.5” IDE + SATA to USB 3.0 Adapter Cable HDD
This cable allows you to connect the Hard Drive with easy. It allows you to connect to 3 different kinds of HDD, namely 2.5” IDE, 3.5” IDE and SATA. It avoids a lot of plug and unplug thanks to this various connectors. IDE and SATA can be read at the same time (You will need two sets of external power in this case. This set only includes one power set. Please contact us for one more set if you need.)
How to use:
- Set your IDE Hard Drive to Master
- Only can read either 2.5” IDE or 3.5” IDE hard drive. Cannot read both at the same time. However IDE and SATA can be read at the same time due to different wire channel. That would require connection to two sets of external power. This adapter set only includes one set of external power. If you need two sets, please contact us.
- If you connect the USB to USB3.0, power will be drew from the socket to support 2.5” IDE and no external power will be needed. If you connect to USB2.0, an external power will be needed. 3.5” IDE and SATA will also require external power no matter connecting to USB2.0 or USB3.0.
- Connection of Power Cable: Connect the 15 Pin male side to your Hard Drive. Connect the 4 Pin male side to the power converter.
- USB side is compliant to USB3.0.
- USB3.0 which provide power to 2.5” IDE HDD.
- 3in1 adapter cable; avoids lots of plug and unplug.
- Carry an OTB One Touch Backup.
- With LED Indicator light (same button as OTB).
- Plug and Play for most of the Windows OS.
USB3.0 Vs USB2.0:
- Band width is 10 times of USB2.0
- Max. speed 5Gb/s; Compare with USB2.0 480Mb/s
- Low energy consumption; e.g. at 25Mb/s, the energy consumption is 25% lower than USB2.0
- Max. power is 4.5W compare with 2.5W of USB2.0
- Better cable construction with heavier wire gauge and double layers shielding.
- Speedy charging (if applicable); 80% faster than USB2.0
- Support more than 2TB of SATA hard drive, 2.5 "/ 3.5" hard drive, 5.25 " CD / DVD-ROM, CD-RW, COMBO, DVD-RW, DVDs-RAM
- Supports ATA / ATAPI device
- Win10/Win8/Win7/Win 98/ME/2000/XP/VISTA / MAC OS 9.X/10.X / Linux (Mac and Linux will need to install the driver provided)
- Support the Mass Storage Class Bulk-Only Transport, compatible with Mass Storage Class Bulk-Only Transport, Revision 1.0A
- IDE/SATA to USB Main Cable Length: Approx. 1M or 3.3Ft
- 43 Pin Female for connecting 2.5” IDE Hard Drive
- 40 Pin Female for connecting 3.5” IDE Hard Drive
- 7 Pin Female for connecting to SATA
- This cable is compatible with SATA Drive V1.0 (1.5 Gbit/s) and V2.0 (3 Gbit/s). It cannot work with eSATA nor Powered Over eSATA eSATAp
- All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.
- This item alone cannot change the speed of any attached devices. The final speed depends on the main board and the accessories connecting.
- 3in1 IDE/SATA to USB3.0 Adapter Cable
- SATA connector Cable Red
- 15 Pin to 4 Pin Power Cable
- External Power Converter
We Also Recommend
Wavertec 43 & 40 Pin IDE & 22 Pin SATA to USB 3.0 Adapter Cable with OTB External Power US Plug
Wavertec US Plug SATA to USB Adaptor High Speed USB3.1 Type A with 12V DC Power Hard Drive USB Adapter for 3.5 2.5 SATA 2.5 SSD 5TB Hard Drive HDD
Wavertec 40cm 1Ft Short Micro USB 3.0 Male to USB 3.0 Male with USB Power Y Cable HDD USB Adapter Micro USB Type B to USB Type A Cable for Hard Drive